Chang Yue Industrial KN-8828P - Manual (Page 30)

30
Modifying a KN-8828P Program
Enter the “Program” mode and select the Program to be modifi ed as described earlier. Press “SET/
SAVE.” The “SET/SAVE” button turns green signifying that you are in the setting mode to change param-
eters for the selected Program. You have entered the area of the fl ow chart above that is indicated inside
the blue rectangle.
TEMPERATURE
When you enter the setting mode the KN-8828P defaults to Segment 1 and “Temperature.” You will
notice that the all the bars of Segment 1 are displayed and a temperature bar signifying the current selected
temperature for Segment 1 is blinking and the digital temperature display is blinking. Using the “+” and
“-” buttons you can now adjust the temperature for Segment 1 as desired.
For any given adjustment, the “+” or the “-” buttons may or may not be illuminated. If a button is not
illuminated it signifi es that you have reached the limit for that portion of the range for that specifi c function
in that Segment. For example, if you have selected the highest programmed temperature for Segment 1,
then the “+” button will no longer be illuminated. When you have completed adjusting the Temperature
for Segment 1, move on to the next adjustment in Profi le 1 by pressing “ENTER.”
FAN
The Fan icon is now blinking and you can adjust fan speed for Segment 1 using the “+” and “-” but-
tons. Adjust the fan speed as you desire, and then press “Enter’ to move on.
Any Program (except
Program 0) can be modifi ed.
Modifi cation can be anything
from changing a single entry
(such as “Temperature” for
“Segment 3”) to creating an
entire program from scratch.
The process described be-
low is illustrated in this fl ow
chart: