Substitute memory reception, Print collation mode, Receiving documents – Panasonic UF-490 User Manual

Page 65

Advertising
background image

Receiving Documents

65

Basic

O

p

era

ti

o

n

s

If the recording paper runs out or jams or if the toner runs out during reception, the machine automatically
starts receiving documents into its image data memory. Stored documents are printed automatically after
replacing the recording paper or the toner cartridge. (See Note 1 and 2)

The printing mechanism of the UF-490 is a Reverse Order Stacking construction. The UF-490 has a Print
Collation Mode that stacks received documents in the correct order. When the Print Collation Mode is
enabled, all received documents are stored into memory first, then printed out in Correct Order Stacking.
The requirements for the Print Collation Mode to be active are; 1) Fax Parameter No. 65 PRINT
COLLATION set to “Valid”, and 2) enough remaining memory.

The unit will print in Reverse Order Stacking (Non-Collation Mode) whenever one of the above requirements
is not met.

NOTE

1 If the memory overflows, the machine will stop receiving and release the communication line.

The document(s) stored in the memory up to that moment will be printed out.

2 If you wish to turn off the substitute reception function, change the setting of Fax Parameter

No. 22 to "Invalid". (See page 34)

Substitute Memory Reception

1

When the machine finishes the memory reception and
there is no recording paper or toner, an Information Code
appears on the display.

NO REC.PAPER 010

OUT OF TONER 041

2

Install the recording paper (see page 17) or replace the
toner cartridge (see page 15).
The machine will automatically start printing the document
stored in the memory.

* PRINTING *

Print Collation Mode

Sending Document Order

Stacking Document Order

3

2

1

Correct Order Stacking

(Collation Mode)

3

2

1

Reverse Order Stacking

(Non-Collation Mode)

1

2

3

Advertising