Avaya 9650C - Manual (Page 44)

a. Press the number key that corresponds to the letter or number you want to enter
until the letter or number is displayed.
b. Pause before entering the next character if the characters are on the same key.
c. To enter a space, press 0.
d. Enter remaining letters or numbers.
e. Press Bksp to delete the last character.
Note:
If you want to remove a letter, number, space, or symbol that is in the middle of
the text you entered, use the left and right navigation arrows to place your
cursor after the character you want to remove. Once your cursor is in the
correct position, press Bksp to remove the character to the left of the cursor.
f. Press More > Abc to change between upper and lower case letters or to enter
numbers.
g. Press ABC again to cycle through the options (Abc/123/abc/ABC) until the type
you want to use is displayed.
h. Press More > Symbols to enter characters that are not on your dialpad.
i. Select the symbol you want to use.
j. Press OK to select the symbol.
k. Press Clear to delete all text and start over.
4. Select the next field.
5. Enter the telephone number and press Primary if applicable. The primary number is
the one that will always display without having to go into contact details.
6. Select the next field.
7. Select the type of number entered (general,work, mobile, home).
8. If you have another number for this contact, scroll down and repeat Steps 5 - 7. You
can add up to two additional numbers for this contact, but you can designate only
one number as primary.
9. Press Save or OK.
Editing a contact
1. Press Contacts.
2. Search for and select the contact you want to edit.
Contacts
44 Avaya one-X ™ Deskphone Edition for 9650/9650C IP Telephone User Guide February 2009