ALTANA Bluetooth - Manual

Bluetooth™ Installation Guide
Note:
Do not plug in the Bluetooth™ adapter before
installation of the driver.
If other Bluetooth™ devices are already configured
on the computer, we recommend to set up the
instrument connection with the Bluetooth™
manager existing on the computer.
1. Bluetooth™ installation
Requirements:
• free USB port, USB 2.0 recommended
• 100 MB free hard disk space
• Windows 2000, XP or higher
Insert the driver CD of the Bluetooth™ adapter
in the CD drive and wait until the installation
program starts. If the program does not start
automatically, run the “setup.exe“ file on the CD.
Follow the instructions on the screen. When
requested, insert the Bluetooth™ adapter into a
free USB port.
After the installation is finished, you are asked to
reboot the computer.
After rebooting insert the Bluetooth™ adapter into
a free USB port. Now the Bluetooth™ settings
need to be defined for the instrument.
BYK-Gardner GmbH · Lausitzer Strasse 8 · 82538 Geretsried · Germany · Tel. +49-8171-3493-0 · Fax +49-8171-3493-140 ·
www.byk.com/instruments