Computer input – Canon LV-7565F User Manual

Page 27

Advertising
background image

27

COMPUTER INPUT

Selects area displayed with this projector. Select resolution at
Display area dialog box.

Display area

Adjustment of horizontal area displayed with this projector. Press
POINT LEFT/RIGHT button(s) to decrease/increase value and then
press SET button.

Display area H

Adjustment of vertical area displayed with this projector. Press
POINT LEFT/RIGHT button(s) to decrease/increase value and then
press SET button.

Display area V

Full screen

Reset

Store

Closes PC ADJUST MENU.

Quit

Other icons operates as follows.

3

To store adjustment parameters, move a red frame pointer to
Store icon and then press SET button. Move a red arrow pointer
to any of Mode 1 to 5 that you want to store and then press SET
button.

Reset all adjust parameters on adjustment dialog box to previous
figure.

Mode free

Vacant Mode Shows values of “Total dots,”

“Horizontal,” “Vertical,” “Display
area H,” and “Display area V.”

Store icon

Mode free icon

Close this dialog box.

To store adjustment data.

To clear adjustment data.

To clear adjustment parameters previously set, move a red
frame pointer to Mode free icon and then SET button. Move a
red arrow pointer to Mode that you want to clear and then press
SET button.

Display area

Press SET button at Display
area icon and Display area
dialog box appears.

This Mode has parameters being stored.

Press POINT LEFT
/RIGHT button(s) to
adjust value and then
press SET button.

NOTE : Fine sync, Display area, Display area H, Display area V and

Full screen cannot be adjusted when “480p”, “575p”, “480i”,
“575i”, “720p (HDTV)”, “1035i (HDTV)” or “1080i (HDTV)” is
selected on PC SYSTEM Menu (P24).

Press POINT LEFT/RIGHT button(s) to switch Full screen function to
“On” or “Off.” Set “On” to resize image with 4 x 3 aspect ratio to fit
screen. This function cannot be adjusted when “ON” is selected on
Anamorphic function (P38).

Advertising