Returning to a pre-marked position, 68 e – Canon DM-GL1 User Manual

Page 68

Advertising
background image

68

E

Using the Full

Rang

e of Features

Returning to a Pre-Marked Position

Use the wireless controller to go back to a pre-determined point on a tape following playback.

1. Press the ZERO SET MEMORY button on the wireless controller at a point you want

to return to later.

• The time code is replaced by a tape counter that is set to zero with the  indication.
• Press the ZERO SET MEMORY button once more to cancel the zero set memory.

2. When you have finished playback, fast forward or rewind the tape. The tape stops

automatically when it reaches the zero set position.

• RTN1 or `RTN appears in the display.
• The tape counter with  indication disappears from the display and the time code reappears.

Notes:
• The zero set memory may not function correctly where there is a break between recordings on the tape.
• You can also use zero set memory to mark a position on a tape in record pause mode. When you then

play back the tape, pressing rewind will take you back to the pre-marked position.

• There may be a slight difference between the timecode and the tape counter readings.
• If you remove the tape while the zero set memory is set, the memory is canceled and the tape counter

reverts to timecode.

• The camera remembers your setting even if you slide the POWER switch to OFF.

REW

PLAY

FF

REC

PAUSE

SEARCH

SELECT

ZERO SET

MEMORY

AUDIO

DUB.

STOP

A/V

INSERT

PAUSE

SLOW

×

2

+ /

/

POWER

OFF

VCR

CAMERA

Advertising