Avlink H3S-01W - Manual

HDMI to 3G-SDIs
Conversion Box
H3S-01W
U SER M ANUAL V1.0
H3S-01W
Package Contents-
ƒ 1 H3S-01W Unit
ƒ 1 User manual
ƒ 1 Power adapter DC 12V
ƒ 2 Screws
ƒ 4 foot pads
ƒ 1 SDI cable for Balden 1694A 1.2m
Any thing missed, please contact with your vendor.
Introduction
The H3S-01W Converter connect computer with HDMI
connector to 3G-SDI monitor or projector. The converter
changes your HDMI signal to 3G-SDI graphic signal.
Features
ƒ Use Panel Link digital technology.
ƒ Compliant with the specification of HDMI
ƒ Support high-resolution display up to 1080P@60Hz
(25-165MHz).
ƒ Inter-locked power plug for DC supply stably.
ƒ Only supports PCM audio. No supports compressed
audio.
Specifications
Function H3S-01W
Input Connector 1x HDMI (Female)
Output Connector
1x BNC(Female)
75Ω Interlocking Socket
Input HDMI support 1080P@60Hz(Max.)
Output 3G-SDI support
[email protected], 625i@50,
720p@50/59.94/60,
1080i@50/59.94/60,
[email protected]/24/25/29.97/30,
1080p@50/59.94/60
SDI Standards SD-SDI , HD-SDI & 3G-SDI
HDMI Cable Distance
(Single end)
10 m (Max.)
Power Adapter (Min.) DC 12V
Housing Metal
Weight 333g
Dimensions (LxWxH) 150x92x25mm
Note:
Different cable qualify might effect upon the maximum
resolution and cable distance.
-1-
Technical Specifications Output Signal
Pin # Signal Pin # Signal
1 TMDS Data 2+ 11 TMDS Clock Shield
2 TMDS Data 2 Shield 12 TMDS Clock -
3 TMDS Data 2- 13 CEC
4 TMDS Data 1+ 14
Reserved
(N.C. on device)
5 TMDS Data 1 Shield 15 SCL
6 TMDS Data 1- 16 SDA
7 TMDS Data 0+ 17 DDC/CEC Ground
8 TMDS Data 0 Shield 18 +5 Power
9 TMDS Data 0- 19 Hot Plug Detect
10 TMDS Clock+
FRONT VIEW
1. “HDMI In” Port
2. Control DIP Switch
3. Audio ON LED
4. Video Support LED
5. Power LED
6. Input Power Jack
REAR VIEW
1. “3G-SDI out” Port
-2-