Coleman GEOSPORT 9392-2301 User Manual

Pole & hub assembly, 15’x15’ geosport, Screenhouse

Advertising
background image

Pole & Hub Assembly

–Begin with the Center Hub and Canopy

Poles.

–Insert the end marked TOP into the

center hub and connect one pole at a
time to the hub. (illus1), (illus. 4)

–Add a canopy hub to the five open

ends of the center hub assembly.
(illus. 2), (illus. 4)

–Insert the clip end of Leg Connector

Poles into the Canopy Hub.

–Where the two open ends of the

Leg Connector Poles meet, insert them
into the two angled openings of the Leg
Hub. Repeat for 4 more sets. (illus. 3),
(illus. 4)

–Insert clip end of Leg Pole into

open end of Leg Hub. Disconnect the
shock-corded Leg Pole so that the
lower spiked pole is laying on the
ground. (illus. 4)

15’x15’ GEOSPORT

SCREENHOUSE

1

2

3

4

When You Are Ready To Set Up Your
Shelter

–Select a level area clear of rocks,

branches and other hard or sharp objects.

–Do not assemble your shelter under trees.
–For easier set up, two or more people

are recommended.

ASSEMBLY PARTS

Instructions apply to Part Number 9392-515

Leg Poles (5)

Part No. 9392-2301

Leg Connector Poles (10)

Part No. 9392-2311

Leg Hub (5)

Part No. 9392-2271

Center Hub Part (1)

No. 9392-2251

Canopy Poles (5)
Part No. 9392-2321

Canopy Hub(5)

Part No. 9392-2261

Illus. 4

Partially assembled

frame with all hubs

in position

Illus. 3

Leg Hub

Partially assembled

frame locked into hub

Illus. 1

Poles inserted

into hub

Illus. 2

Canopy Hub

Center Hub

Canopy Pole

Center Hub

Canopy Hub

Leg Hub

Leg Pole

Canopy

Pole

Leg Connector Poles

Leg Connector Poles

Leg Pole

Leg Hub

Advertising