Canon A4050 IS - Manual (Page 166)

166
If an error message is displayed, respond as follows.
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way (p. 20).
Memory card locked
• The write-protect tab of the SD/SDHC/SDXC memory card is set to the locked position.
Switch the write-protect tab to the unlocked position (p. 20).
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (p. 20).
Memory card error (p. 133)
• If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help Desk
(p. 20).
Insufficient space on card
• There is not enough free space on the memory card to shoot (pp. 53, 73, 89) or edit
images (pp. 124 – 126). Either erase unneeded images (p. 122) or insert a memory
card with enough free space (see “Specifications” (p. 38)).
Change the battery pack. (p. 17)/Change the batteries (p. 19)
No Image.
• The memory card does not contain any images that can be displayed.
Protected! (p. 121)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play back
AVI/RAW
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
Cannot magnify!/Cannot rotate/Cannot modify image/Cannot register this
image!/Cannot modify/Cannot assign to category/Unselectable image.
• The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies.
Magnify* (p. 119), Rotate (p. 123), Edit* (pp. 124 – 126), Print List* (p. 154), and
Photobook Set-up* (p. 158)
Exceeded selection limit
• More than 998 images were selected for Print List (p. 154). Choose 998 images or less.
On-Screen Messages