Setting the media, Media sizes, Printer operation – CITIZEN CL-S631 User Manual
Page 22
2
Printer Operation
22
Setting the Media
Media Sizes
The position of label and tag media is sensed by either a transparent sensor
or a reflective sensor.
Transparent sensor: Detects the gaps between label media and notches of
tag media
Reflective sensor:
Detects the black mark
* Use a transparent sensor for label media gaps and media with black marks.
* Use a transparent sensor for fan fold media.
* If the label pitch is 1 inch or less, set the Small Media Adjustment menu to ON and
match it to the label that uses the value of the Small Media Length menu.
A
C
I
I
G
H
D
K
K
F
E
B
J
L
N
M
Notch detection
Black mark detection
Transparent sensor
Continuous media
Label
Label
Label
Printed area
Reflective sensor
Media direction
Label media
Min. value mm (inches) Max. value mm (inches)
A
Label width
19.50 (0.77)
118.00 (4.65)
B
Liner width
19.50 (0.77)
118.00 (4.65)
C
Label left edge position
0 (0)
2.54 (0.10)
D
Length of gap between labels
2.54 (0.10)
812.8 (32.00)
E
Label length
6.35 (0.25)
812.8 (32.00)
F
Label pitch
6.35 (0.25)
812.8 (32.00)
G
Liner thickness
0.06 (0.0025)
0.125 (0.0049)
H
Total media thickness
0.06 (0.0025)
0.25 (0.01)
I
Position of right edge of notch
3.60 (0.14)
60.80 (2.39)
J
Position of left edge of notch
0 (0)
57.20 (2.25)
K
Notch length
2.54 (0.10)
17.80 (0.70)
L
Right edge of black mark
15.00 (0.59)
66.50 (2.62)
M
Left edge of black mark
0 (0)
51.5 (2.02)
N
Black mark width
3.18 (0.125)
17.80 (0.70)