Conclusion – Cisco 6503 User Manual
Page 18
Cisco Systems, Inc.
All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 18 of 19
disabled, the power available to the system is the combined power of the power supplies. Note that in this configuration, if
one supply fails, the system might not have enough power to supply all the modules. To enable or disable power redundancy,
the following command is used:
Sup-A> (enable) set power redundancy enable | disable
Each line card has different power requirements so power requirements vary from chassis to chassis. The user guide
documents the Cisco Catalyst 6500 Series power requirements to help you understand the power requirements for each
particular line card. These requirements are described at:
Conclusion
The High Availability and Redundancy features of the Cisco Catalyst 6500 Series provide a very reliable switching and
routing platform. The hardware redundancy provided by dual supervisor engines, dual routing engines, dual switching fabrics,
and a dual power supply help to reduce the potential downtime of a network. Software redundancy features such as the High
Availability feature of Cisco Catalyst OS and the DRM or SRM options for MSFC failover build on this hardware redundancy
to create a very stable operating environment. The combination of these features, in addition to the system performance and
intelligent network services, makes the Cisco Catalyst 6500 Series unparalleled in the industry.