GE 59797 GE Wall Switch & Outlet Single Pole White User Manual

GE Accessories for electrical

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Instructions:

1) Shut off power to the

circuit at fuse box or circuit

breaker. Remove wall plate

and test to be sure power

has been completely

disconnected.

2) Remove old switch and

outlet from wall box and

disconnect wires. If metal

tab between

terminal screws

was removed

from old

device,

remove

from new

switch.*

3) Disconnect

wires

from old

device. Be
sure wires
are stripped to

3M".

4) Connect wires to new

switch as shown,

forming wire clockwise

3/4 around screw.

Tighten screws securely.

Connect grounding
(green or bare) wire to

GREEN
screw on new switch,

and tighten screw.

5) Insert newly wired

switch into the wall

box. Fasten

with mountin

screws

provided.

6) Attach a

standard
2-outlet

wall

plate.

Restore

power.

Form wires 3/4 around

terminal screws (do not

overlap).

Advertising