Component access, Washer access, A warning – Whirlpool Thin Twin User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION TWO
COMPONENT ACCESS
A WARNING
i
I
k
Electrical Shock Hazard
«¡i
w
Disconnect electric power from appliance before servicing.
Replace all panels before operating.
Failure to do so could result in death or electrical shock.
Washer Access
Front Panel Removal
1. Remove the Transition Panel by removing the three (3) retaining screws. Tip the panel down
and lift it out. (Fig.
11)
Transition
Panei
2. Release the two washer top retaining clips and slide the washer top forward off the unit.
(Fig- 12)
Top
Retaining
Clip
Fig. 12
3. Remove the two (2) Washer Front Panei retaining 5/16” screws. Then remove the Front Panel
Brace and remove the Front Panel.
(Fig. 13)
Fig. 13
Front Panel
Top Retaining
Retaining Screws
Ciip