GE 51143 GE Wall Switch Receiver Smart Remote Plus Compatible User Manual
User's manual, Wall switch, L_. a
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Wall Switch
Smart Remote PlusBecem
a
User's Manual
Enclosed you will find
•(1) Wall Switch
•Wiring Device Screws
and Wire Nuts (bagged)
The GE Smart Remote Plus advantage
Any transmitter in the GE Smart Remote Plus
product line is capable of controlling every
receiver—the ultimate in home convenience.
Control any number of light fixtures or
appliances from up to 150ft* away by
choosing the transmitter and receiver
combination that best suits your needs.
Questions?
Call 1-800-443-4924
c(^us or visit us at
usiE
(B
E
(/)
u
u
ÂWARNING
Risk oi electric shock
•Turn poweroff before
inspectionjnstaiation
or removal
•Use indoors only
•Do not use in
Risk of fire
•Do not use to control
fluorescent lighting fixtures,
motor-operated appliances or
transfoimer-supplied appliances
•Do not exceed electrical ratings
•Use copperwire only with
this device
The following GE Smart Remote Plus transmitters (sold separately) can control THIS receiver:
r
a
o
aaa
aaa
w o a
aaa
Key Chain Remote Wall Mount Control Whole-Home Control Motion-Sensing Control Garage Control
RF100TXPS RFI02TXPS RF2000KINPS
RF613TX COMING SOON!
The transmitters above can also control the following GE Smart Remote Plus receivers (sold separately):
i
■ \ r ^
I I
INCLUDE'^'
L_.
a
liidoor Outlet
RFIOORXPS
Outdoor Outlet Socket Adopter
Wall Switch
RFI06RXPS RFI04RXPS RF102RXPS
Garage Adapter Dimmer Switch
COMING SOONI COMING SOONI
IMPORTANT! These devices are NOT compatible with devices from other systems.
You must purchase Smart Remote Plus transmitters and receivers to ensure compatibility.
To extend the range of the
transmitters and receivers
in your system, use the
GE Smart Remote Pius
Range Extender
(sold separately).
Range Extender
RFIOORXTX
Smart Remote Plus
• 1
Expanding your system
The GE Smart Remote Pius devices operate on any of 8 user-settable channels. The channels are
easy to set/ adjust-with the simple turn of a knob. Set up your GE SmartHome™ by purchasing as
many transmitters and receivers as you need. The following table is just one example of how you
can configure your Smart Remote Plus system:
Area
CH Transmitters
Receivers
Bedroom
1
Bedside - Wall Mount Control
Entrance - Wall Mount Control
(2) Bedside Lamps - (2) Socket Adapters
Corner Torchiere - Indoor Outlet Adapter
Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Living Room
2
Coffee Table - Timer/Controller
Entrance - Wall Mount Control
(2) End Table Lamps - (2) Socket Adapters
Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Christmas Tree - Indoor Outlet Adapter
3
Window Santa - Indoor Outlet Adapter
Lighted Poinsettia - Indoor Outlet Adapter
Basement
4
Entrance - Wall Mount Control
(4) Overhead Can Fixtures - (4) Socket Adapters
(2) Fluorescent Fixtures - (2) Indoor Outlet Adapters
Garage
5
Entrance - Wall Mount Control
(2) Ruorescent fixtures - (2) Outdoor Outlet Adapters
Overhead Light Fixture - Wall Switch
Outdoor
6
Foyer-Wall Mount Control
Car Keys-Key Chain Remote
Entry Light-Wall Switch
Coach Lantern-Wall Switch
7
Christmas Lights - Outdoor Outlet Adapter
Yard Santa - Outdoor Outlet Adapter
Kitchen
8
Entrance - Wall Mount Control
Coffee Maker - Indoor Outlet Adapter
Operating Instructions
FOR INDOOR USE ONLY
1. Find the slot labeled HOUSE CODE on the front of the unit.
2. Setthe HOUSE CODE to any one of the following settings:
B
NOTE: Make sure ALL your GE Smart Remote Plus devices have the same HOUSE CODE setting. The
transmitters WILL NOT control the receivers if they have different HOUSE CODE settings.
IMPORTANT! HOUSE CODES help eliminate interference (devices randomly turn on / off).
If you experience interference, change the HOUSE CODE on all your GE Smart Remote Plus
transmitters and receivers to a different setting.
3. Setthe CHANNEL by using the knob on front as shown.
NOTE: If you set your Wall Switch to CHANNEL 1, the unit can be controlled using
any transmitter set to CHANNEL 1. If you set your Wall Switch to CHANNEL 2, the
unit can be controlled using any transmitter set to CHANNEL 2... and so on.
IMPORTANT! A transmitter will control a receiver ONLY if they have the same HOUSE CODE and
CHANNEL settings.
WARNING: Turn off power first by removing the fuse or switching the circuit breaker to OFF. This
product requires some knowledge of electrical wiring and must he installed in accordance with
the National Electrical Code (NEC) and local codes.
4. Remove the wall plate and existing wall switch.
5. Connect the Wall Switch wires to the electrical boxwires using the following diagram as a guide.
*
Meets Standard color coding. Color coding in your home may vary.
Make sure you twist the strands of each lead tightly together and proteetthe connections by
screwing wire nuts clockwise over the ends. Secure each wire nut with electrical tape.
6. Carefully push the wiring into the elecfrical box, mount the Wall Switch and replace the existing wail plate.
NOTE: Metallic wall plates may degrade operating range.
7. Restore power.
8. Slide the control switch beneath the toggle to ON (OFF) to enable (disable) the unit.
The following are examples of devices you can control with your Wall Switch:
CEILING LIGHT
SHED LIGHT
OUTDOOR FLOODS
DO NOT USE TO CONTROL FLUORESCENT LIGHTING FIXTURES, MOTOR-OPERATED APPLIANCES
OR TRANSFORMER-SUPPLIED APPLIANCES
9. Using any of the transmitters set to the same CHANNEL and HOUSE CODE, test the installation by
using the ON and OFF buttons.
If your unit does not work properly or if you want additional assistance, please call 1-800-443-4924.
We would be happy to answer ALL of your questions. Visit us on the web a
to download application notes, manuals and to find out more about the GE SmartHome™ product line!
Specifications
FOR INDOOR USE ONLY
DO NOT EXCEED ELECTRICAL RATINGS
Electrical Rating..........................................................................................120V, 60Hz
Maximum Tungsten Load............................................................. 360W Incandescent Only
Maximum Motor Load........................................................................................ 1/3 HP
*Functional range may be adversely affected by one or more of the following factors: weather, radio
frequency interference, low transmitter battery and obstructions between the transmitter and receiver.
This device complies with Part 15 of the FCC rules. Operation is subjeetto the following two conditions:
1. This device may not cause harmful interference, and;
2. This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment
Made in China for GE Home Electric Products, Inc.
Nela Park, Cleveland, OH 44112
Desc.: RF102RXPS