Healthier Choice SOUNDSOLUTION Acoustical Underlayment User Manual

Sound solution, With

Advertising
background image

S I M P L E • E A S Y • E F F E C T I V E

F L O A T I N G F L O O R I N S T A L L A T I O N I N S T R U C T I O N S

1. Be sure sub-floor is clean and dry.

2. Roll out one 6 foot section of Sound

Solution Vapor Bloc parallel to the wall

and in the same direction as you plan to

install the laminate or floating floor. The

product will roll out with the Vapor Bloc

film up and the foam side down to the

sub-floor.

3. Next install the laminate or floating floor

planks atop the underlayment according

to the manufacturer’s instructions. Be

sure that you are still able to see the

edge of the underlayment so that you

can properly line up the next roll.

4. Install the next 6 foot section of

underlayment, butting the foam

underlayment seams together. Remove

release film and press overlapping

Vapor Bloc film into pre-applied

adhesive, making certain the film is

securely bonded to the adjacent section

of underlayment. Repeat the above

steps until installation is complete.

5. Be sure to allow appropriate expansion

gaps at the perimeter of the installation

as recommended by the laminate or

floating floor manufacturer.

Plastic Overlap

Adhesive with

Release Film

Sound Solution underlayment can be installed utilizing the floating or nail-down installation method with the film

side up, fabric side down. NOTE: Nail-down installation method compromises vapor barrier. Do NOT glue

down Sound Solution Vapor Bloc. Sound Solution without Vapor Bloc film is available for glue down
installations. For more information please call (800) 872-8426.

SOUNDSOLUTION

PREMIUM ACOUSTICAL UNDERLAYMENT FOR LAMINATE & WOOD FLOORS

TM

WITH

Advertising