O load the dryer, Clean the lint filter, Turn on the dryer – Kenmore ELITE 796.8051 User Manual

Page 19: Select a cycle, Select cycle modifiers, Select cycle options, Begin cycle, O end of cycle, Loading the dryer, Cleaning the lint filter

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

HOW TO USE

OPERATING THE DRYER

POWER

Normal

Small Load |

Wrinkle

j 1

Damp Dry

Bulky/Bedding

Délicates

Casual

Express Dry

"f 1

Medium 1

Heavy Duty

' /

Touch Up

• 1

Low 1

Sanitize

Air/Rack Dry i

Temp 1 1

O

LOAD THE DRYER

Load the dryer with the wet laundry from the washer. If

the load is extra large, you may need to divide it into

smaller loads for proper performance and fabric care.

&

O

o

CLEAN THE LINT FILTER

If the lint filter has not already been cleaned, lift out the

filter and remove the lint from the last load. This will

help ensure the fastest and most efficient drying perfor­
mance.

TURN ON THE DRYER

Press the POWER button to turn on the dryer. The

cycle LEDs will illuminate and a chime will sound, if
turned on. Refer to page 18.

SELECT A CYCLE
Turn the Cycle Selector Knob either direction until the
LED for the desired cycle is on. The preset tempera­

ture, dry level, and option settings for that cycle will be

shown. Refer to page 20.

(/}

O

z

UJ

High

ÿ Extra Dry

1 60

1 ’

1 50

Medium

= Normal

1 40

1

1 30

Low

I

Damp Dry

1 20

Temp

Dry Level

Loud

Soft

Off

Timed Dry

Chime

Wrinkle

Guard

Control Lock

START/PAUSE

Drum Light

More Time

less Time

My Cycle

■ Status ■

SELECT CYCLE MODIFIERS
Default settings for the selected cycle can now be
changed if desired. This can be done using the cycle
modifier buttons as shown on page 23 (temperature,
dry level, and chime).

NOTE: Not all options or modifiers are available on all

cycles. A different chime will sound and the LED will not
come on if the selection is not allowed.

SELECT CYCLE OPTIONS
Cycle options can be added using the option buttons
as shown on page 24 (wrinkle guard, and control
lock).
NOTE: Not all options or modifiers are available on all
cycles. A different chime will sound and the LED will
not come on if the selection is not allowed.

BEGIN CYCLE
Press the START/PAUSE button to begin the cycle.

The cycle can be paused at any time either by open­

ing the door or by pressing the START/PAUSE button.
If the cycle is not restarted within 4 minutes, the dryer

will shut off and the cycle settings will be lost.

O END OF CYCLE

When the cycle is finished, the chime will sound if it is
set. Remove your clothing from the diyer immediately
to reduce wrinkling. If Wrinkle Guard is selected, the
dryer will tumble briefly every few minutes to help pre­
vent wrinkles from setting in the clothes.

19

Advertising
This manual is related to the following products: