Setting oven controls, Minute – Kenmore 970-5984 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Setting Oven Controls

Setting Clock

When the appliance is first powered up, 12:00 will flash in

the display (See Fig. 1). The time of day must first be set

before operating the oven.

\D-n

i C U

n

Fig. 1

Example; to set the clock to 1:30:

1. Press key pod.

2. Enter 1 3 0 using numeric key pads.

3. Press START .

Important note:

The clock cannot be changed when a Cook Time or Delay

Start feature is active.

Setting Tinner

The minute timer allows you to track your cooking times

without interferring with the cooking process. The timer

may be set from 1 minute up to 11 hours and 59 minutes.

Example; to set the timer for 5 minutes:

1. Press Timer Set/Off key pod.

2. Enter 5 using numeric key pod.

3. Press START key pod to start timer.

To cancel the timer when active press Timer Set/Off

key pod again.

Important notes:

• The timer does not start or stop the cooking process. It

serves os on extra minute timer in the kitchen that will

beep when the set time has run out. The timer may be

used alone or while using any of the other oven functions.

• The timer will display hours and minutes until 1 hour

remains. When less than 1 hour remains, the display will

count down in minutes and seconds. Once the timer has

less than 1 minute remaining only seconds will display.

• When the timer is active during o cooking process, the

minute timer will show in the display. To view the

information of any other active oven function, press the

key pod once for the other function to view the status.

Add 1

Minute

Use the Add 1 Minute to set additional minutes to the timer.

Each press of the key pad will odd 1 additional minute. If

Add 1 Minute key pod is pressed when the timer is not

active, the timer will activate and begin counting down

from 1 minute.

Example; to add 2 minutes to the timer:

Press Add 1 Minute key pod twice.

Setting 12 or 24 hour display mode

The clock display mode allows you to choose between 12

or 24 hr modes. The factory pre-set clock display mode is

12 hours.

Example; to set 12 or 24 hour display mode:

1. Press and hold key pod for 6 seconds.

2. Press Flex Clean key pad to toggle between 12 hour

(Fig. 2) or 24 hour (Fig. 3) display modes.

3. Press START to accept choice.

Fig. 2

Fig. 3

Changing between continuous bake setting or

12-Hour Energy Saving feature

The oven control has a factory preset built-in 12 Hour

Energy Saving feature that will turn off the oven if the oven

is left on for more than 12 hours. The control may be

programmed to override this feature to continuously bake.

Example; to change between continuous bake or 12-Hour

Energy Saving feature:

1. Press and hold Timer Set/Off key pod for 6 seconds.

2. Press Flex Clean to toggle between 12 Hour Energy

Saving (Fig. 4) or continuous bake (Fig. 5) feature.

3. Press START to accept choice.

Fig. 4

Fig. 5

12

Advertising