Kenmore ASPIRADORA 116.35913 - Manual (Page 5)

A
Please pay special attention to these hazard alert boxes, and follow any instructions
given. WARNING statements alert you to such dangers as fire, electric shock, burns
and personal injury. CAUTION statements alert you to such dangerous personal
injury and/or property damage.
ASSEMBLY INSmUCnONS
mmmmà
A
WARNING
Electrical Shock Hazard
Do not plug into the electrical suf^ly
until the assembly is complete. Failure
to do so could result in electrical shock
or injury.
Before assembling the vacuum cleaner,
check the PACKING LIST on the cover of
the separate REPAIR PARTS LIST. Use
this list to verify that you have received all
the components of your new Kenmore
vacuum cleaner.
HANDLE ASSEMBLY
Remove the handle screw from the body
of the vacuum.
Remove the combination brush from the
handle to expose the handle mounting hole.
Position the handle assembly as shown in
the illustration below.
When installing the handle, firmly press
the handle onto the body. Secure with
handle screw provided.
Begin to tighten the screw with your fin­
gers. It may be necessary to adjust the
handle slightly.
Using a screwdriver, tighten handle screw.
Reinstall combination brush.
A
CAUTION
Do not over tighten.
Overtightening could strip the han­
dle screw hole.
Do not operate the vacuum cleaner
without the screw in place.
CORD ASSEMBLY
Make sure the quick release upper cord
hook is in the upright position. Remove
the wire tie from the power cord.
Make sure the
power cord is
placed into the lock­
ing notch on the
body as shown. This
helps keep the
power cord out from
under the vacuum
cleaner agitator.
Locking
Notch
Power
Cord -
release cord hook and the carrying handle.
Lodi the power cord plug onto the power
cord.