Appliqueing, Embroidery, Monogramming – Kenmore 17922 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
APPLIQUEING
Settings same as Satin Stitching
Select an applique design to be applied to
your garment and bast^ it in place. Satin
stitch around the raw edge of the applique
completely covering the ^dge. You may want
to do this with a contrasting color of thread.
EMBROIDERY
Settings same as Satin Stitching
Satin stitch can be used to produce many
different designs and patterns. To sew the
flowers illustrated, back the fabric with
interfacing or paper and draw on the design
with tailor's chalk. Turn the stitch width
control from 0-4-0 to from each petal and
leaf. Join the flowers and leaves with straight
stretch stitch. If usir^g paper, carefully
remove it when you haYe finished sewing.
MONOGRAMMING
Settings same as Satin Stitching
To sew initials, first back the fabric with
interfacing or paper. Drjaw the initials on to
the fabric with tailor's chalk. Satin stitch,
adjusting the width frotfn 0-4 as you begin
and end the stroke of a letter. Or the same
stitch width can be used throughout. If using
paper, carefully remove it when you have
finished sewing.