Bound buttonhole – Kenmore 17922 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BOUND BUTTONHOLE
A template has been provided so that you
may sew perfectly sized rfectangles each time
you make a bound buttbnhole. Just follow
the directions given below.
SETTING
Stitch Width - 0 or Stitch Selector---------------------
Pressure Regulator - 1 or 2
Other settings same as regular worked
buttonhole
1.
Space buttonholes on garment-mark
length on right side of fabric with pins.
Place patch of fabric over each button
hole and mark ends of buttonhole with
chalk or pencil. Bastp patch into place.
Using template similar in size to button
hole, stitch rectangle on patch and
garment. Do not sew over pins. (Fig. 1)
2.
Slash through patch and garment to
within 1 /4" of ends of rectangle. Carefully
cut diagonally into corners as shown.
(Fig. 2)
3. Turn patch to wrong side through slash.
Press as shown. (Fig. 3, 4)
oia| fc)i3| (cO iof5|
.
I
2>
wm
J
I I
®(5
Fig. 1
Fig. 2
Fig. 3
Fig. 4
44