Materials and basic tools needed, Materials needed, Basic toois – Kenmore POWER MISER 153.330551 User Manual

Page 7: Basic tools

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Materials and Basic Tools Needed

Materials Needed

To simplify the installation Sears has available the installation

parts shown below. You may or may not need all of these materi­

als, depending on your type of installation.

VENT ELBOW

WATER HEATER STAND 24"x24"xia"

FOR USE WITH WATER HEATERS

INSTALLED IN RESIDENTIAL

GARAGES HAVING A DIAMETER 24"

OR LESS AND A RATED CAPACITY 75

GALLONS OR LESS

EXPANSION TANKS

FOR THERMAL

EXPANSION CONDI­

TIONS AVAILABLE IN

2 GALLON AND 5

GALLON CAPACITY

THROUGH LOCAL

SEARS STORE OR

SERVICE CENTERS

FLEXIBLE WATER

HEATER GAS CON­

NECTOR WITH

FITTINGS

WATER HEATER INSTAL­

LATION KIT WITH FLEXI­

BLE CONNECTORS FOR

3/4" OR 1/2" THREADED

OR COPPER PLUMBING

c

VENT PIPE

WATER HEATER HEAT

TRAPS HELP REDUCE HEAT

LOSS DUE TO THERMAL

SYPHONING

DRAIN PANS

AVAILABLE IN 20" DIAMETER FOR

WATER HEATERS HAVING A DIAME­

TER 18" OR LESS AND AVAILABLE IN

28" DIAMETER FOR WATER HEATERS

HAVING A DIAMETER 26" OR LESS

Basic Toois

You may or may not need all of these tools, depending on your

type of installation. These tools can be purchased at your local

Sears store.

• Pipe Wrenches (2) 14"
• Screwdriver
• Tin Snips

6

Foot Tape of Folding Rule

• Garden Hose
• Drill
• Pipe dope or Teflon Tape

GARDEN HOSE 6 FOOT TAPE

PIPE

WRENCH

SLOT-HEAD SCREWDRIVER

PHILLIPS SCREWDRIVER

TIN SNIPS

ROLL OF TEFLON TAPE

(USE ONLY ON WATER

^ CONNECTIONS)

PIPE DOPE (SQUEEZE TUBE)

(USE FOR WATER AND

GAS CONNECTIONS)

DRILL y

ADDITIONAL TOOLS NEEDED

WHEN SWEAT SOLDERING

•Tubing Cutters or Hacksaw
• Propane Torch
• Soft Solder
• Solder Flux
• Emery Cloth
• Wire Brushes

HACKSAW

3/4" WIRE BRUSH

1/2" WIRE BRUSH

PROPANE

TORCH

ROLL OF LEAD FREE

SOFT SOLDER

ROLL OF EMERY SOLDER FLUX

TUBING

CUTTER

Advertising
This manual is related to the following products: