Air conditioner features (continued) – Kenmore 253.79184 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Air Conditioner Features (continued)
Note:
The
following instructions describe the Control Panel Touch Pads. The same instructions apply to the
Remote Control.
To turn unit on or off press the ON/OFF ® button:
To use Cool, press the MODE button to select:
Energy Saver
Mode I
To change the Temperature Setting use the UP and Down arrows as required:
Q
To adjust Fan Speeds press the Fan Speed button and select:
I
Fan
I
Speed
I
Fan
Speed
I
Fan
Speed
LOW
MED
HIGH
To use the Auto Fan Feature press the Fan Speed button and select AUTO:
Note: Fan speed starts at high and adjusts to a slower speed as the room temperature
dictates. For example, if the room doesn’t get too warm it will stay at the slowest speed.
If the room temperature rises quickly, such as when a door is opened, it will
automatically go to the highest speed. The fan speed will re-adjust back to the slowest
speed as the room returns to the original set temperature.
I
Fan
Speed
To operate on Fan Only, press the MODE button to select:
Energy Saver
Mode I
Use Fan Only function to circulate room air without air conditioner cooling. You can use
any fan speed you prefer and the actual room temperature will be displayed in the
DISPLAY.