Exploded view - agitator assembly, To replace belt, Belt routing – Kenmore 116.31722 User Manual
Page 18: Carpet, Incorrect routing of belt
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO CLEAN AGITATOR:
NOTE: In order lo keep cleaning efficiency
high and to prevent damage to your vacu
um, the aoilator must be cleaned every lime
the belt is changed.
The agitator must also be cleaned every 7
to 10 uses.
Remove any dirt or debris in the belt path
area or in the agitator area.
Exploded View - Agitator
Assembly
Bearing
Cover
Carefully remove
any string or
debris located on
thé agitator, end
caps, or agitator
shaft.
Replace the end caps. See the exploded
view for correct assembly.
TO REPLACE BELT:
Make sure that the carpet/bare floor selec
tor is in the
carpet
position.
Loop the new belt on the motor shaft.
Motor
Shaft
Bolt
Pulley
Carpet/Bare Floor
Selector Shaft
BELT ROUTING
Correct Routlna of Bolt
(Soloctor in Carpot Position)
I j j
oan
' ,
—1* * I
Csrpct/S^rs
y
’ 'L
Pedal
Agitator
Motor
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Belt on Selector Shaft)
Carpet/Bare
j'Qi ] Floor Pedal
Agitator
Motor
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Selector In Bare Floor Position)
Carpel/Bare
Floor Pedal
CavpetJ&are Floor
Selector Shañ
18