Setting oven lockout feature, Instructions press display, To activate the oven lockout feature – Kenmore 790.7937 User Manual

Page 19: To reactivate normal oven operation, Instructions press, I'30, Setting oven controls

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Oven Lockout

Temperature Display

Setting Oven Controls

O

ven

L

ockout

Setting Oven Lockout Feature

The (^) pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door, prevents the

Warmer Drawer and most oven controls from being turned ON. It does not disable the clock, Kitchen Timer or the interior
oven lights.

INSTRUCTIONS

PRESS

DISPLAY

To activate the Oven Lockout feature:

1. Press and hold (^) for 3 seconds (Fig, 1),

2. After 3 seconds a beep will sound,

LOG

will appear and

"DOOR

LOCKED"

will flash in the display. Once the oven door is locked

the

"DOOR LOCKED"

indicator will stop flashing.

To reactivate normal oven operation:

1. Press and hold (s) for 3 seconds. A beep will sound.

LOC

will

clear. The

"DOOR LOCKED"

will continue to flash until the oven

door has completely unlocked (See Fig. 2).

2. Theoven isagainfullyoperational.

(

t

E-) for 3 seconds

(S) for 3 seconds

I'30

ion

l O U

LOC

Fig.l

Fig. 2

DISPLAY

Setting Temperature Display — Fahrenheit or Celsius

The

BROIL

and

FLEX CLEAN

pads control the Fahrenheit or Celsius temperature display modes. The oven

control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.

INSTRUCTIONS

PRESS

To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit:

1. To tell if the display is set for Fahrenheit or Celsius press

(

broi

^ (B

r

^ for 7seconds

(Fig. 3) and hold for 7 seconds;

"550°"

will first appear in the

display and then a beep will sound. If

"F"

appears, the display

is set to show temperatures in Fahrenheit (Fig. 4). If

"C"

appears, the display is set to show temperatures in Celsius

(Fig. 5).

2. Press

to switch between Fahrenheit or Celsius display

modes. The display will show either

"F"

(Fig. 4) or

"C"

(Fig. 5).

3. Press to accept the change or press (s) to reject the

change.

I‘30 550

Fig.3

19

Advertising
This manual is related to the following products: