Kenmore 790.7937 - Manual (Page 28)

Setting Oven Controls
• Setting Convection Convert Feature
• Setting Add 1 Minute Feature
To set the Convection Convert feature
--- ^
The coNVfflT CONV CONVERT pad is used to automatically convert a standard baking recipe for convection baking. When
set properly, this feature is designed to display the actual converted (reduced) temperature in the display.
Convection Convert may ONLY be used with a Bake, Timed Bake ora Deiay Start (Delayed Timed Bake) setting. When
used with a Timed Bake or a Delay Start (Delayed Timed Bake) setting, the Convection Convert feature will display a "CF" for
check food when the bake time is 75% complete (See Fig. 4). At this time the oven control will sound 3 long beeps at regular
intervals until baking has finished. When the bake time has completely finished the control will display
"End" and will sound
PRESS
3 long beeps every 30 seconds until the (g) pad is pressed (See Fig. 5).
INSTRUCTIONS
Using Convection Convert {Bake) feature to
automatically adjust oven temperature (example
below when setting oven for 350°F):
1. Arrange interior oven racks and place food in oven.
2. Press ( bai ^ ^ will appear in the display (Fig. 1 ).
3. Press (T) (T) . "BAKE" will flash and "350°" will
appear in the display (See Fig. 2). If a Timed Bake or a Delayed
Start (Delayed Timed Bake) is desired, enter the times now.
4. Press cw Ì rt ■ "CONV BAKE" and the oven temperature
adjustment will appear in the display (for this example it is
325°F). A beep will sound once the adjusted oven temperature
is reached. The display will show "325°", "CONV BAKE" and
the fan icon (Fig. 3).
Note: The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating
(See rotating fan in Fig. 3).
Press (S) to cancel Convection feature at any time.
Note; The minimum amount of cook time using the Convection
Convert feature with a Timed Bake ora Delay Start (Delayed Timed
Bake) is 20 minutes.
DISPLAY
Fig.l
l;30 350’
Fig. 2
kCON^
CONVERT I - u n i
j . j y l ^ l 3 C 3
Fig.3
hju M [
Fig. 4
I-30 End
Fig. 5
To Set Add 1 Minute Feature
The add 1 MINUTE pad is used to set additional minutes to the Kitchen Timer. Each time the pad is
pressed, another minute is added to the Kitchen Timer if the Kitchen Timer is already active. If the Kitchen Timer is not
active and the pad is pressed, the Kitchen Timerfeature will become active and will begin counting down from 1
minute.
When the Kitchen Timer reaches the end of the set time, the timer will display “End” and signal 3 long beeps at regular
intervals until (g) Is pressed, l( a Kitchen Timer tirnction has ended pressing will restart the timer at 1 minute.
For further information on how to set the Kitchen Timer feature see To Set the Kitchen Timer instructions.
28