Inserting the remote control batteries, Horizontal air-direction adjustment, Vertical air-direction adjustment – Kenmore 580.75116 User Manual
Page 16: Operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
INSERTING THE REMOTE CONTROL
BATTERIES
1. Remove the cover from the back of the remote
controller.
2. insert two batteries.
• Be sure that the (+) and (~) directions are
correct.
• Be sure that both batteries are new.
3. Reattach cover.
HORIZONTAL AIR-DIRECTION
ADJUSTMENT
• The horizontal air direction is adjusted by moving
vertical louver.
• The vertical louver control levers are located in the
right and left side of the air discharge.
FIG. 31
' Do not use rechargeable batteries.
Make sure that both batteries are new.
' In order to prevent discharge, remove the batteries
from the remote control if the air conditioner is not
going to be used for an extended period of time
Keep the remote control away from extremely hot
or humid places.
To maintain optimal operation of the remote
control, the remote sensor should not be exposed
to direct sunlight.
' The remote control can be mounted on a wall
using the mountable holder.
VERTICAL AIR-DIRECTION ADJUSTMENT
• The vertical air direction is adjusted by moving the
horizontal louvers.
FIG. 32
16