Kenmore 790.479 - Manual (Page 28)

Oven Cleaning
To Start the delayed Self-Clean Cycle
The FLEX CLEAN , DELAY START (^) pads and length of clean cycle, controls the Delayed Self-Clean operation. The
automatic timerwill turn the oven on and off at the time you select in advance. Be sure to review TO STARTTH E SELF-CLEAN
CYCLE for recommended clean times.
INSTRUCTIONS
To set the control for the Self-Cleaning Cycle to start
at a delayed time and shut off automatically
(example: 3 hour self-clean cycle to start at 4:30)
1. Be sure the clock is set with the correct time of day and the
oven door is closed.
2. Press (g). "UPPER" and "CLEAN" will flash and "3:00" HR
will show in the display (Figure 1). The control will automatically
clean fora 3 hour period (default self-cleaning cycle time). Note:
If a 2 or 4 hour clean fime is desired, press (g) (g) (g) for
2 hour or press (g) (g) (g) for a 4 hour clean time.
3. Press : START. The "DOOR LOCKED" icon will flash; "UPPER",
"CLEAN" icon and the letters "CLn" will remain on in the
display (Figure 2).
4. Press (|^). will be displayed. "DELAY" (Figure 4).
Enter the desired start time using the number pads
C±)(3X£) 5).
5. Press START . CLEAN ", " DELAY", " LOCK", UPPER " and
"DOOR " will be displayed (Figure 6).
6. As soon as the control is set, the motor driven oven door lock
will begin to close automatically. Once the door has been
locked the "LOCK" indicator light will go on.
7. The control will start the self-cleaning at the set start time, for
the period of fime previously selected. At that time, the icon
"DELAY " will go out.
When the Self-Clean Cycle is Completed
1. The time of day and "END" will remain in the display (Figure 7).
2. Once the oven has cooled down for approximately 1 HOUR, and
"END" is no longer displayed, the oven door can then be opened
(Figures).
PRESS
¡ i Y tart ))
®dX£)
START
DISPLAY
n „ D^nn
Lun J-UU
Figure 1
Ittn: 'ISO:
Figure 2
ICtn l'Su
Figures
Figure 4
Cln "^30
Figure 5
lln ISO:
Figures
End M'3u
Figure 7
Figures
28