Setting oven controls, Broil, Ii warning – Kenmore 790.7050 User Manual

Page 12: A warning, Ik caution, To set broil, Setting oven controls -13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Setting Oven Controls

Broil

Use the Broil feature to cook meats that require direct

exposure to flame heat for optimum browning. Use the

broiler drawer and rack along with the broil pan and

insert when broiling. The broiler drawer offers 3 different

broil rack positions.

ii WARNING

I

DO NOT use oven or broiler drawer for

storage. Items placed in oven or broiler drawer will catch

fire.

A WARNING

i Should an oven fire occur, close the door

and drawer and turn the oven OFF. If the fire continues,

use a fire extinguisher. DO NOT put water or flour on the

fire. Flour may be explosive.

ik CAUTION

I

Always use oven mitts when using the

oven or broiler drawer. When cooking, the oven, cooktop,

broiler drawer and racks will become very hot which can

cause burns.

ik CAUTION

I

The broil pan and insert allows grease to

drain and be kept away from high heat of the broiler. DO

NOT use broil pan without insert. DO NOT cover insert with

aluminum foil; the exposed grease could ignite.

Important notes:

For medium doneness, position the broiler rack close to the

oven burner (upper or middle positions). For well-done

foods such as chicken, lobster tails or thick cuts of meat,

position rack further away from oven burner (lower

position).

For optimum browning, close broiler drawer and preheat

broiler 5 minutes before adding food.

3 rear locating

hole positions

tilt up front of rack

to remove and adjust

Fig. 2

Fig. 3

To set broil:

1.

Slide broiler drawer out until drawer stops.

2.

Remove broiler pan and insert (See Fig. 1).

3.

If needed, reposition broiler rack in broiler drawer

while the range is still cool. Be sure to read broiler rack

position recommendations (See Notes).

4.

If needed, change broiler rack position by tilting front

of rack up & pulling rack completely out from locating

holes in rear of broiler drawer (See Fig. 2). Reposition

back of rack in one of 3 locating holes and allow front

of rack to slide down into the corresponding slots in

front of broiler drawer (Fig. 3). Be sure rack is level

before broiling.

5.

Place insert on broiler pan and place prepared food on

insert. Place broiler pan and insert with food into

broiler on drawer rack as shown (See Fig. 1). Slide

broiler drawer completely into range.

6

.

Press Broil key pad.

7.

Press the /\ or \/ key pad until the desired broil

setting level appears in the display, nor is for normal, hi

for high and lo is for low setting. Most foods can be

broiled at the hi broil setting. Select the lo broil setting

to avoid excess browning or drying of foods that

should be broiled to the well-done stage.

8.

Broil on one side until food is browned; turn and broil

on other side.

9.

When finished broiling or to cancel broil at any time

press STOP key pad.

12

Advertising
This manual is related to the following products: