Kenmore 119.1643301 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Install Cabinet Toe Plate
□
Attach the Cabinet Toe Plate to the Cabinet Bottom Panel using 4 Phillips Head Bolts
(MBxlOmm).
□
Place cabinet in upright position on casters.
A
fcfeirWwW
Phillips Head Bolt MBxlOmm
Qty: 4
Install Cabinet Doors and Cabinet Front Crossbar
□
Insert the Cabinet Right Door bottom pin into the Cabinet Bottom Panel (Inset 1), and insert the
Cabinet Right Door top pin into the Cabinet Front Crossbar (Inset 2). With door magnets
extending into Cabinet, attach the Cabinet Front Crossbar to the right side of the Cabinet using
2 Phillips Head Bolts (M6x35mm) and Plastic Washers (M6) (Inset 3). Do not fully tighten bolts
at this time.
□
Insert the Cabinet Left Door in the same way and attach Cabinet Front Crossbar to the left side
of the Cabinet using 2 Phillips Head Bolts (M6x35mm) and Plastic Washers (M6). Fully tighten
all 4 Front Crossbar bolts at this time.
Phillips Head Bolts M6x35mm
Qty: 4
.♦I
L
t
Plastic Washer M6
Qty: 4
Inset 2
Inset 1
Inset 3