Kenmore 100.90007 - Manual (Page 6)

OPERATING YOUR COFFEER/IAKÉR
BREWING COFFEE cant
3 Place eilhef ¡ha permanent gold-tone filler
or a size 1 X 4 papar filter Inla the brew
basket (see Fig 5)
4 Add ground coffee. The amount oí coffee
you use is a matter of personal fasis
(we reoommenci one heaping tablespoon
for every two cups)
Experiment... try differant amounfs of
ground colfee per cup until you brew your
perfect cup of coffee You can also try using
the paper fliier along with the gold-lone tiiter.
5 Close the caver Place carafe on the plate
and plug in the appliance The display
window illuminates blue and the cotfeemaksr beeps for about 3 seconds
to let you know the clock is not set, Tt» clock does not have to be set to brew coffee
To sel the clock Hms. sea SETTING THE CLOCK, TiMEPi AND AUTO-BREWING
S Turn on the Goffesmaker by pushing in the BREW ON/OFF button, Tha ON/OFF button
will (Ilumínala blue and the word Brew will show up irr the control panel display showrng
that fhs coffeemaker is brewing. In a few seconds, hot water flows into the filter When
the water has stopped flowing, Hie cofteemaker's blue BREW ON/OFF light goes out
The Time Since Brew function begins to keep track of fhs freshness of the coffee In
the carafe. For delayed brewing- sea SETTING THE CLOCK. TIMER AND
AUTO-BREWINQ-
7 When you have poured out ail the eoflee in Iha carafe, press fhe BREW ON/OFF
button io turn oil the appliance's Time Since Brew functiort.
NOTE: if the coffeemaker Is not turned off, it wiif aulomaticalty shut itself off
after two hours.
PAUSE AND POUR FEATURE
The pause and pour feature enables you to remove the carafe from the CaffeemakBr and
pour a cup of coffee before brewing is finished When the carafe is removed, g spaoia!
valve slops the flow of coffee from the brew basket to the carafe, Brewing does not stop.
If the carafe is not replaced under tha brew basket after 20 seconds, water and coffee
will overflow from the brew basket,
SETTING THE CLOCK,TIMER AND AUTO-BREWING
USETHE Set Clock Button TO SETTHE CLOCK:
1 Press Set Clock button and the button’s indicator light will flash,
2. Set the time of day tsy pressing the Hour and Minute buttons. Be sure to sat the time
with fhe correct AM and PM deslgnalicm.
3 You can make the hours and minutes move mors quickly to the clock display by
holding lha buttons down
4 If you press the Set Clock button end don't do anything for 5 seconds, the button's
light flashes S limes then turns off To resume press the Set Clock button again
The clock starts a few seconds after you finish sailing it,
6