Warmer drawer, Removing and replacing the warmer drawer – Kenmore ELITE 790. 7830 User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Warmer Drawer

Removing and replacing the warmer drawer

A WARNING

I

Electrical shock hazard can occur and

result in serious injury or death. Disconnect appliance

from electric power before cleaning and servicing the

warmer drawer.

To remove the warmer drawer:

1. Turn power OFF to the appliance before removing the

warmer drawer.

2. Open the warmer drawer completely.

3. On left warmer drawer rail, locate black release lever

and press up with finger while pulling out slightly on the

oven drawer handle. On right warmer drawer rail,

locate black release lever and press down with finger

while pulling out slightly on the warmer drawer handle

(See Fig. 1).

4.

The warmer drawer should now be released from the

rails. Remove warmer oven drawer (using level & square

motion) completely out and away from the appliance.

To replace the warmer drawer:

1. Pull the bearing glides to the front of the outer

compartment glide channels until they snap into place

(See Fig. 3).

2.

Carefully line up both sides of the warmer drawer glide

rails to the outer compartment glide channels located

inside the empty warmer drawer compartment (See Fig.

2

).

3. While holding the warmer drawer level and square

using the warmer drawer handle, push (do not force) the

warmer drawer all the way into the outer compartment

glide channels all the way into the range. Open the

warmer drawer again to verify the glides have seated.

4. If you do not hear the levers “click” or the bearing

glides do not feel seated remove the warmer drawer

and repeat steps 1 through 3 again. This will minimize

possible damage to the bearing glides.

Left-hand rail and release

X

Warmer

drawer

handle

Right-hand rail and release

Fig. 1

31

Advertising