Special door care instructions, Care & cleaning – Kenmore ELITE 790. 7830 User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Care & Cleaning

Removing and replacing the lift-off oven door

A

CAUTION

I To avoid possible injury when removing or

replacing the oven door, follow the instructions below carefully

and always hold the oven door with both hands positioned away

from the door hinge area.

A

CAUTION

I

The door is heavy. For safe, temporary storage,

lay the door flat with the inside of the door facing down.

To remove oven door:

1. Open oven door completely (horizontal with floor - Fig.1).

2. Pull the door hinge locks on both left and right door hinges

down from the oven frame completely towards the oven door

(Fig. 2). A tool such as a small flat-blade screwdriver may be

required.

3. Firmly grasp both sides of oven door along the door sides (Do

not use the oven door handle - Fig. 3).

4. Close the door to the broil stop position (the oven door will stop

into this position just before fully closing).

5.

With the oven door in the broil stop position, lift the oven door

hinge arms over the roller pins located on each side of the oven

frame (Fig. 4).

To replace oven door:

1. Firmly grasp both sides of oven door along the door sides (Do

not use the oven door handle - Fig. 3).

2. Holding the oven door at the same angle as the removal

position, seat the hook of the hinge arm over the roller pins

located on each side of the oven door frame (Fig. 4). The hook

of the hinge arms must be fully seated onto the roller pins.

3. Fully open the oven door (horizontal with floor - Fig. 1).

4. Push the door hinge locks up towards and into the oven frame

on both left and right oven door hinges (Fig. 2) to the locked

position; then close the oven door.

Special door care instructions

Most oven doors contain glass that can break. Read the following

recommendations:

• Do not close the oven door until all the oven racks are fully in

place inside the oven cavity.

• Do not hit the glass with pots, pans, or any other object.

• Scratching, hitting, jarring or stressing the glass may weaken its

structure causing an increased risk of breakage at a later time.

voc-

Fig. 2

37

Advertising