Kenmore 790.7942 - Manual (Page 21)

Forthe best baking performance use the PREHEAT feature. The Preheat feature will bring the oven up to the set
baking temperature and then indicate when to place the food In the oven. Preheating is not necessary when roasting or
cooking casseroles. The oven can be programmed to preheat at any temperature between 170°F to 550“F.
Setting Oven Controls
• Preheat
Setting Preheat
INSTRUCTIONS
Note: After the oven has reached the desired temperature (this
example, 350°F) the control will sound a long beep, the "PRE" light
will turn off and oven set temperature will be displayed (Fig. 3).
When PRE disappears from the display, the oven set temperature
has been reached. Once the oven has preheated, PLACE FOOD fN
THE OVEN.
Press when baking is complete or to cancel the Preheat
feature.
PRESS
To set the Preheat temperature for 350“F:
1. Arrange the interioroven racks.
2. Press . “350 F”, the default oven set temperature, will \Heaty
appear in the display (See Fig. 1). (See BAKE instructions for
changing oven settemperature.)
3. Press "PRE" and "BAKE" will appear in the display as
the oven heats and reaches 350°F (See Fig 2).
DISPLAY
■Dfl 3Cn°
• JU d jU
Fig. 1
•3£3 PIPE □
Fig. 2
30 350'
Fig.3
To change Preheat temperature while oven is
preheating (example changing from 350 to 425°F):
If it is necessary to change the preheat temperature while the oven
Is preheating to the original set temperature:
1. While preheating, press again. (See Fig. 3)
/' pì T t
\Heaty
¡■■30 435'D
BAKE
Fig. 4
2. Enter the new preheat temperature. Press
"425°" will appear in the display (See Fig. 4).
Ci)(D(D 1:30 PPE □
BAKE
3. Press "PRE" will appear in the display as the oven heats
to 425°F (See Fig. 5). A long beep will sound once the oven set
temperature reaches 425°F (See Fig. 6).
Fig. 5
l:3D 4350
BAKE
4. When baking is complete press (^).
Fig. 6
21