Kenmore 116.23637C - Manual (Page 16)

Always follow ail safety precautions when
cleaning and servicing the Power-Mate®,
A WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical shock
or personal injury from cleaner sud­
denly starting.
|#> ing A nd AjirrUgR ci^iNd • ' . f • ; ;
Disconnect cleaner from electrical outlet.
Check and remove hair, string and lint build­
up frequently in the Power-Mate® brush and
brush support areas. If build-up becomes
excessive, disconnect Power-Mate® from
wand and follow the steps below.
TO REMOVE BELT
3. Turn Power­
Mate® right side
up. Press handle
release pedal and
lower the swivel.
Lift rear latches up.
1. Turn Power­
Mate® upside
down.
2. Unscrew the
two (2) Power­
Mate® cover
screws.
4. To remove cover,
grasp the sides and puli
out.
5. Depress tabs
on rear of
agitator cover
and rotate
fon/vard to
release from
the Power­
Mate® base.
Agitator
Cover
6. Lift agitator
assembly out
and remove
worn belt.
End Cap
7. Check and clean end cap areas.
16