Kenmore 116.23637C - Manual (Page 8)

HOW TO START
A
WARNING
Personal Injury and Product Damage
Hazard
• DO NOT plug in if switch is in ON
position. Personal injury or
damage could result
• The cord moves rapidly when
rewinding. Press cord rewind
with foot only. Keep children away ■
and provide a dear path when
rewinding the cord to prevent
personal injury.
• DO NOT use outlets above
counters. Damage from cord to
items in surrounding area
could occur.
Cord
Rewind
Button
1 , Pull cord out of canister to desired length.
The cord will not rewind until the cord
rewind button is pushed.
NOTE: To reduce the risk of electric shock,
this vacuum cleaner has a polarized plug;
one biade is wider than the other. This plug
will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, con­
tact a qualified electrician to install the prop­
er outlet. Do not change the plug in any
way.
2. Plug the polarized power cord into a 120
Volt outlet located near the floor.
To rewind: Unplug the cleaner. Hold the
plug while rewinding to prevent damage or
injury from the moving cord. Push cord
rewind button.
3. Lower wand from upright position by
pressing on the handle release pedal.
A
CAUTION
DO NOT leave the Power-Mate*
running in one spot in the upright
position for any length of time. Damage
to carpet may occur.
4 . Select a pile height setting by pressing
the small pedal on the rear of the Power­
Mate®. The pile height setting shows on the
indicator. See SUGGESTED PILE HEIGHT
SETTINGS.
Attention: Refer to your carpet manufactur­
ers cleaning recommendations. Some more
delicate carpets may require that they be
vacuumed with the Power-Mate® agitator
turned off, to prevent carpet damage.
5. Select a switch
position on the
handle.
FLOOR - turns on the canister motor only.
CARPET - turns on both the canister and
the Power-Mate® motors.
NOTE - When this switch is in the FLOOR
position, the headlight DOES NOT function
since no electricity flows to the Power­
Mate*.