Setting continuous bake or 12 hour energy saving, Instructions, Press – Kenmore ELITE 790.7943 User Manual

Page 14: Display, Setting timer, To set the timer (example for 5 minutes), Continuous bake or 12 hour energy saving mode, Setting cook time, R-nn j-uu, Setting oven controls

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Setting Oven Controls

Continuous Bake orTwelve Hour Energy Saving Mode

Timer

Setting Continuous Bake or 12 Hour Energy Saving

The

TIMER

and

FLEX CLEAN

(^^

3

) pads control the Continuous Bake or 12 Hour Energy Saving features. The

oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left
on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

INSTRUCTIONS

To set the control for Continuous Bake or 12 Hour

Energy Saving features:

1

. Press and hold (|^) for

6

seconds or until the control beeps

once. (Fig.1). "12h" or- h" will appear in the display and the
control will beep once.

FieiC

PRESS

DISPLAY

for

6

seconds

Press

to switch between the 12 Hour Energy Saving and

continuous bake features. Note: "12h" (See Fig. 2) in the
display indicates the control is set for 12 Hour Energy Saving
feature and - h" (See Fig. 3) indicates the control is set for
the Continuous Bakefeature.

3. Press

to accept the change (See Fig. 4} display will

return to time of day or press (^) to reject the change.

Setting Timer

'Timer

STARTJ or (STOP

Fig. 4

The

TIMER

pad controls the Timer feature. The Timer serves as an extra reminder in the kitchen that will beep when

the set time has run out. The Timer will not START or STOP the cooking process. The Timer feature may be used during
any of the other oven control functions. Refer to "Minumum & Maximum Control Pad Settings" on page 12 for time amount
settings.

INSTRUCTIONS

To set the

Timer

(example for 5 minutes):

1

. Press

. (See Fig. 5).

2. Press the number pads to set the desired time in the display

(example

Press

. The timer will begin a count

down. (See Fig.

6

).

Note: If is not pressed the timer will return to the time of

day.

3. When the set time has run out, the clock will sound with 3 long

beeps every 5 seconds until (IS) is pressed (See Fig. 7).

To cancel the Timer before the set time has run out:

Press (I'voff). The display will return to the time of day.

PRESS

DISPLAY

Fig.

5

r-nn

J-uu

Fig. 6

Fig. 7

14

Advertising