How the cycle works, Setting the controls, You see – Kenmore Sens-A-Clean 665.95829 User Manual
Page 38: Example shows light soil setting), Press, How the cycle works setting the controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOW THE CYCLE WORKS
The SENS-A'CLEAN^*^ Self-Cleaning cycle uses
temperatures much hotter than normal oven use to
break up and burn away soil and grease. The oven is
equipped with a sensor that evaluates by-products
released from burning off baked-on food and cleans
accordingly. There is no guessing on how long to set
the time because all steps are taken care of by the
“one-touch” button. The oven will automatically shut
off once it senses it is clean. As another option, the
soil level can be manually set to tight, average or
heavy soil levels.
The door must be closed completely for it to lock and
the cycle to begin. If properly closed, the door will
lock approximately 6 seconds after START/ENTER is
pressed. The cycle time includes an approximate 30
minute cool down time. To see the time of day during
the cycle, press CLOCK for 5 seconds.
NOTE: The first Self-Cleaning cycle will be approxi
mately 4 hours in duration. This is to allow the high
temperature calibration of the sensor and to burn off
manufacturing residues.
SETTING THE CONTROLS
№ steri;
1
. Press SENS-A-CLEAN.
PRESS
SEnS setting will automatically determine the
length of cleaning time. Maximum clean time is
4 ' A hours and minimum is 2 hours.
--------
YOU SEE
h i t n b
2. (Optional) If you would prefer to set the soil level
yourself, you can set Light, Average or Heavy soil.
You can scroll through all 4 settings (SEnS, SoilL,
SoilA, and SoilH) continuously by pressing the
SENS-A-CLEAN keypad.
Press SENS-A-CLEAN twice, SoilL (for light soils)
will appear on the display.
Press SENS-A-CLEAN three times, SoilA (for
average soils) will appear on the display.
Press SENS-A-CLEAN four times, SoilH (for heavy
soils) will appear on the display.
SoilL will clean for approximately 2 - 2 ' A hours,
SoilA for 3 - 3 ' A hours, and SoilH for 4 - 4 A hours.
3. Press START/ENTER.
PRESS
YOU SEE
c l n S o ,
a
(example shows light soil
setting)
PRESS
STABT
ENTER
YOU SEE
»i
_
r r
r
L f J C n j
4. After the SENS-A-CLEAN Self-Cleaning cycle ends:
LOCKED goes off and the door unlocks.
YOU SEE
L f lU
38