Kenmore Sens-A-Clean 665.95829 - Manual (Page 39)

; 5. Press any pad to remove “End” and bring back
I time of day; or open door, at which time “door”
i will be displayed. Then close door and time of
; day will appear in display window.
SETTING THE CONTROLS
YOU SEE
(when pressing any pad)
YOU SEE
(when opening the door)
6 . After the oven is cool, wipe off any residue or ash
with a damp cloth or sponge. If needed, touch up
spots with a mild abrasive cleanser or cleaning
sponge.
1. Press SENS-A-CLEAN.
SEnS setting will automatically determine the
iength of cleaning time. Maximum clean time is
A ' h hours and minimum is 2 hours.
NOTE: Make sure the clock is set to the correct
time of day. (See “Setting the clock” in the “Using
Your Range" section, p. 15.}
PRESS YOU SEE
ISENS-A-
CLEAN
2. (Optional) If you would prefer to set the soil level
yourself, you can set Light, Average or Heavy soil.
You can scroll through all 4 settings (SEnS, SoilL,
SoilA, and SoilH) continuously by pressing the
SENS-A-CLEAN keypad.
^
Press SENS-A-CLEAN twice, SoilL (for light soils)
will appear on the display.
Press SENS-A-CLEAN three times, SoilA (for
average soils) will appear on the display.
Press SENS-A-CLEAN four times, SoilH (for heavy
soils) will appear on the display.
SoilL will clean for approximately 2-2'/2 hours,
SoilA for 3-3/5 hours, and SoilH for 4-4/2 hours.
PRESS
^ENS^
CLEAN
YOU SEE
C . ' n S o / i T
(example shows light soil
setting)
3. Press DELAY START. PRESS
DELAY
START
YOU SEE
4. Set the start time.
Press the HOUR/MIN (▲) or (▼) pad(s) until the
desired time of day to start the SENS-A-CLEAN
Self-Cleaning cycle shows on the display.
(example for 12:30 start time)
continued on next page 39