Adjustment of cutting width – Kenmore 385.166551 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Adjustment of cutting width

When cutting width is too narrow or too wide for seam
width, adjust as follows.

Q] Turn off the power switch and unplug the machine.
[H Open the looper and side covers.
U] Turn the cutting width adjusting dial to get desired

position of lower knife.

(A) When cutting width is too narrow:

Turn cutting width adjusting dial clockwise.

Lower knife will move to right.

(B) When cutting width is too wide:

Turn the cutting width adjusting dial
counterclockwise.

Lower knife will move to left.

[U Close the looper and side covers.
[5] Test stitch to check the cutting width.

• The cutting width of the model can be adjusted

approximately 1/8" to 3/16" {3.0 to 5.0 mm) from the

right needle position depending upon your sewing needs

or fabric being used.

[2] [3] H I

(A)

i

Standard

Estándar

Standard

(B)

i i

20

Advertising