Kenmore 385.166551 - Manual (Page 72)

Turning corners
Outside corners
Q] Use scissors to cut a 1" (2.5 cm) iong strip from
3 corners of the fabric. See illustration.
(T) Cutting line
(D Cut off
(3) Uncut corner
[U Starting from uncut corner (3), serge down the entrire
length of the fabric side. Serge one stitch past the fabric
edge.
Raise the needle and pressar foot.
Gently pull the thread chain off the chaining finger (
pivot the fabric.
(4) Chaining finger
I and
“A
I When you sew the next side, align the cutting line with
the upper knife. The needle position should match with
the previous row of stitching.
(T) Cutting line
(D Needle position
(6) Upper knife
_y
I Then continue serging.
(T) Cutting line
(D Upper knife
64