Front panel – Kenmore 146.1622201 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Front Panel
□
Stand cart upright.
□
Attach back brace to top of cart with (4)
IVI4x10 screws.
(A) Do not fully tighten at this time.
□
Attach one front panel to lower half of cart with (4)
IVI4x10 screws,
and to bottom shelf with (1)
IVI4x10
screw. (B)
IMPORTANT: Holes on top and bottom edges of front panels must be towards the left side of grill.
□
Attach other front panel to upper half of cart with (4)
IVI4x10 screws.
(C) Connect upper and lower panel
through center hole with (1)
WI4x10 screw.
□
Attach tank baffle to front panels and bottom shelf with (2)
IVI4x10 screws.
(C)
□
Fully tighten back brace screws.
The screws used in this step:
16pcs of M4x10 screws
VTA
16-640-01303702-3-58