Self-cleaning, Instructions press, Stopping or interrupting a self-cleaning cycie – Kenmore ELITE 790.99613 User Manual

Page 36: Adjusting oven temperature, Instructions, To adjust the oven temperature higher, Press, To adjust the oven temperature lower, Display, Adjusting the oven temperature

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Self-Cleaning

INSTRUCTIONS

PRESS

Stopping or Interrupting a Self-Cleaning Cycie

If it becomes necessary to stop or interrupt a self-cleaning cycle

due to excessive smoke or fire in the oven:

1. Press

2. Once the oven has cooled down for approximately 1 HOUR

and the "DOOR LOCKED" Icon is no longer displayed, the
oven door can then be opened (Figure 1).

Note: Self-Clean cycle can never be set to start more than 12 hours in advance.

DISPLAY

Figure 1

Adjusting Oven Temperature

The temperature in the oven has been pre-set at the factory. When first using the
oven, be sure to follow recipe times and temperatures. If you think the oven is cooking
too hot or too cool for the temperature you select, you can adjust the actual oven
temperature to be more or less than what is displayed. Before adjusting, test a recipe
by using a temperature setting that is higher or lower than the recommended
temperature. The baking results should help you to decide how much of an adjustment

is needed.

INSTRUCTIONS

To adjust the oven temperature higher

1

.

2

.

3.

Press (Bak^ for 6 seconds (Figure 2).

To increase the temperature use the number pads to enter the

desired change. (Example 30°F)

(Figure 3). The

temperature may be increased as much as 35°F (19°C).

Press

to accept the temperature change and the display

will return to the time of day (Figure 7). Press ^^

stop

J to reject the

change if necessary.

PRESS

CD®

or

will return to the time of day (Figure 4). Press to reject the

change if necessary.

To adjust the oven temperature lower

1. Press for 6 seconds. 0° will appear in the display (Figure 5).

2. To decrease the temperature use the number pads to enter the

desired change. (Example -30°F)

(^^3^

press

(Figure 6). The temperature may be decreased as much as 35°F
(19°C).

3.

Press

to accept the temperature change and the display

Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature.

CD®©

or

DISPLAY

D H

n n

J U u u

Figure 2

_ n

j p ’

J U

J U

Figure 3

I

Figure 4

on

nn

■JU uu

Figure 5

■ D n _ j r r

■JU JU

Figure 6

Figure 7

36

Advertising