Kenmore 790.4773 - Manual (Page 8)

Control Pad Features
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions
are the same. Also, pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
OVEN INTERIOR
LIGHT PAD
Used
to turn oven
interior light ON
and OFF.
WARM &
HOLD PAD
Used to set
the Warm &
Hold
feature.
SELECT SELF­
CLEAN PAD
Used to select
the Self-Cleaning
cycle. A 2, 3 or 4
hour Self-Clean
fime may be
selected.
BAKE PAD
Used to
select the
bake
function.
BROIL PAD
Used to
select the
variable broil
function.
COOK TIME UP and DOWN ARROWS PADS Used
PAD Used to along with the function pads to select oven
enter the length temperature, cook time, start time (when
of the baking programming an automatic start time), time
time.
of day, clean fime and minute timer.
Cook Time Pad
(some models)
DELAY START PAD Used to
set the desired start time for
baking or cleaning. May be
used with COOK TIME to
program a delayed bake cycle.
CLOCK
SET PAD
Used to set
the time of
day.
STOP CLEAR PAD Used to clear any function previously
entered except the time of day and minufe fimer. Press
STOP CLEAR to stop cooking. Also the STOP CLEAR
pad is used to activate oven lockout setting.
Select Clean Pad
(some models)
ADD 1 MINUTE PAD Used to add 1
minute to the Timer Countdown. This
feature works with the Kitchen Timer only
and does not affect any cook time or start
time functions (some models).
TIMER SET/OFF PAD Used to set or cancel the minute timer. The minute
timer does not start or stop cooking. Also, TIMER SET/OFF Pad is used to
set the Continuous Bake Feature.
Warm &
Hold Pad
(some
models)
Delay Start
Pad
(some
models)
For a silent control panel:
The (^) pad controls the Silent Control Panel feature. The Silent Control Panel feature allows the oven control to be
operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and
later returned to operating with all the normal sounds and beeps.
To change control from normal sound operation to silent control operation
1. Press and hold pad for 6 seconds. A beep will sound, will appear, "UPPER" and "DELAY" will flash in the
display. After 6 seconds, a beep will sound and "SP" (speaker) will appear in the display.
2. Press yv or "v pad to switch between normal sound operation and silent operation mode. If "SP" appears, the control
will operate with normal sounds and beeps. If appears, the control is in the silent operation mode.
3. Wait 5 seconds to accept the change or press pad to reject the change.
Temperature Conversion (Fahrenheit / Celsius)
The pad controls the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. Note: both ovens
will be changed at the same time.
To change display from Fahrenheit to Celsius or Celsius to Fahrenheit
1. Press pad and hold for 6 seconds. A beep will sound, "—" will appear "UPPER" and "BROIL" will flash in the display.
After 6 seconds a beep will be heard and "F" or "C" will appear in the display. If "F" appears, the display is set to show
temperatures in Fahrenheit. If "C" appears, the display is set to show temperatures in Celsius.
2. Press ^ or -v" pad to switch between Fahrenheit or Celsius display modes. The display will show either "F" or "C".
3. Wait 5 seconds to accept the change or press pad to reject the change.