Kenmore 110.4597 - Manual (Page 15)

Wash Cycles
Choose Wash Cycles by selecting the button next to the desired
cycle. Each cycle is designed for different types of fabric and soil
levels.
W ash C ycles
D elicate
■ Each cycle has a preset Soil Level (cycle time), Water
Temperature, Spin Speed and may have preset Options. The
preset settings provide the recommended fabric care for the
selected cycle.
■ The preset settings can be changed anytime before START is
selected. Not all Options and Modifiers are available with all
Cycles. To change settings after the cycle has started, select
PAUSE/CANCEL, then select the desired settings. Select and
hold START (for approximately 1 second) to continue the
cycle.
Preset cycle settings
Each cycle has a preset Cycle Time, Water Temperature, and
Spin Speed. The preset settings provide the recommended fabric
care for the selected cycle. See chart.
Cycle Soil Level
(hr:min)
Water Temp Spin
Speed
Whitest Whites Heavy
(1:00) Hot/Cold High
Heavy Duty Heavy
(1:05) Hot/Cold High
Norma l/Casuai Normal
(0:45) Warm/Cold High
Sanitary Heavy
(2:00) Extra Hot/
Cold High
Handwash/
Delicate Normal
(0:35) Cold/Cold Extra Low
Rinse & Spin Normal
(0:20) Cold/Cold High
Drain & Spin Normal
(0:12) Cold/Cold High
Whitest Whites
This cycle is especially designed for cleaning loads of soiled
white fabrics with the addition of bleach. Hot washing
temperatures assure optimal bleach activity. An additional rinse
provides optimal rinse performance to avoid chlorine residues on
your laundry. This cycle combines fast-speed tumbling, longer
wash time, and high-speed spin to shorten drying time.
Heavy Duty
Use this cycle to wash loads of sturdy, colorfast fabrics and
heavily soiled garments. This cycle combines fast-speed
tumbling, longer wash time, and high-speed spin to shorten
drying times.
Normal/Casual
Use this cycle to wash loads of no-iron fabrics such as sport
shirts, blouses, casual business clothes, permanent press
blends, cottons and linens, and synthetic fabrics. This cycle
combines medium-speed tumbling, high-speed spin, and a load
cooling process to reduce wrinkling.
Sanitary
Use this cycle to clean heavily soiled colorfast fabrics. This cycle
combines a very hot water temperature and fast-speed tumbling
to help ensure the removal of heavy soils and stains. It Is
recommended that you set your hot water heater to 120°F (49°C)
to ensure proper performance during this cycle. The Sanitary
cycle also helps eliminate 99.999% of 3 common infectious
bacteria, even when no bleach is used. Extra high speed spin
helps shorten drying time.
Handwash/Delicate
Use this cycle to clean handwashable and special-care
garments. This cycle combines low-speed tumbling and extra
low speed spin for gentle fabric care.
Extra Cycles
Select the button for the desired cycle.
CUSTOM
P
rogram
O
PRESS & HOLD 3 SLC.
RINSE & S pin
®
D rain & S pin
You can change the selection anytime before START is selected.
Custom Program
Custom Program allows you to store a customized wash cycle for
future use.
To Customize a Wash Cycle:
1. Select a cycle.
2. Select the desired Options.
3. Select the desired Modifiers.
4. To record the cycle press and hold Custom Program
(approximately 3 seconds) until a beep sounds. The Custom
Program cycle is now stored for future use.
5. Press START.
To reuse this cycle at another time, select CUSTOM PROGRAM
and press START.
15