Kenmore 110.4597 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Rinse & Spin

Use this cycle to get a rinse and spin only. This cycle combines

fast-speed tumbling and high-speed spin. If desired, you can
reduce the spin speed by selecting the speed you want from the
SPIN SPEED modifier.

Rinse & Spin is useful for

Loads that need rinsing only.

Adding fabric softener to a load using the fabric softener

dispenser.

Drain & Spin

Use this cycle to drain your washer or to drain and spin your

wash load. The spin speed Is preset to high. If desired, you can
reduce the spin speed by selecting the speed you want from the
SPIN SPEED modifier.

NOTE: Loads of synthetics, delicate fabrics, handwashables, and

woolens should be drained with no spin or low spin to avoid
fabric stress.

Prewash

Use this option for loads of heavily soiled garments that need
pretreatment.

■ Add detergent to the Main Wash Compartment of the

Dispenser Drawer.

This option adds tumbling time prior to the selected main cycle.
The washer continues automatically from prewash into the main
wash cycle.

Extended Spin

Use this option to add an additional spin to any cycle to improve
drying times for some heavy fabrics or special-care items by
reducing excess water, which may save energy.

End of Cycle Signal

This signal is helpful when you are removing items from the
washer as soon as it stops. Select ON or OFF.

As with any new product, you will hear sounds that you are not
accustomed to. You may hear various sounds when the door is
locked and unlocked and during the washing, rinsing, and
spinning process. Between changes in wash actions, there will
be momentary pauses. You will hear water spraying and
splashing during the wash and rinse cycles. These new sounds
and pauses are part of normal washer operation. See

“Troubleshooting.”

Preset cycle settings of Wash/Rinse Temp, Spin Speed, and Soil
Level can be changed. You can change a modifier after starting a
cycle anytime before the selected modifier begins. Not all
Modifiers are available with all options and cycles.

MODIFiEHS

Лито T

lmf

C

ontro

!

• EXTRA HOT / COLD • H

igh

You can customize your wash by adding OPTIONS to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all Options are
available with all cycles.

O

ptions

P

rewash

EXTENDED S

pin

END of CYCLE

S

ignal

ON / OFF

See the “Laundry Guide” section for an overview of possible
options for each Wash Cycle selection.

You can select more than one option for a cycie. Some
options cannot be added to some cycles.

If an option is available with a selected cycle, the light for that

option will glow when selected.

If an option is unavailable with a selected cycle, there will be a

short tone, and the light for that option will not glow when
selected.

• HOT/COLD

• WARM / WARM

• WARM / COLD

• COLD / COLD

W

ater

temp

WASi iR/NSt

• M

edium

»LOW

• E

xtra

low

• No S

pin

V.__

SPIN SPEED

• 2ND RINSE

• NORMAL RINSE

BIMSE

OPTIONS

To change the water temperature, select the WATER TEMP
button until the desired setting glows.

To change the spin speed, select the SPIN SPEED button
until the desired setting glows.

• HEAVY

• NORMAL

• LieHT

SOIL L

evel

■ To change cycle time, select SOIL LEVEL button.

2nd Rinse

A second rinse can be used to aid In the removal of detergent or

bleach residue from garments. This option provides an additional
rinse with the same water temperature as the first rinse. This is

the default rinse setting for the Whitest Whites cycle.

Normal Rinse

Consists of a two phase rinsing process that is effective for
everyday laundry.

16

Advertising
This manual is related to the following products: