Kenmore 110.4597 - Manual (Page 5)

INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
■ Pliers (that open to 1®/i6" [39.5 mm])
■ Flashlight (optional)
Tools needed for installation
■ Open end wrench 17 mm and 13 mm
■ Level
■ Wood block
■ Ruler or measuring tape
Parts supplied
o
B e a d e d s t r a p T r a n s p o r t b o lt h o le p lu g ( 4 )
Pedestal
You have the option of purchasing a pedestal for this washer. This
will add to the total height of your washer.
This pedestal (with storage drawer) is available in three colors.
To order, call your local Sears store. For further Information,
please cal 1
1-800-4-MY-HOME® (1-800-469-4663).
Alternate Parts
Parts listed are available from your local Sears store or Sears
Service Center. For further information, please call
1-800-4-MY-HOME® (1-800-469-4663).
If You Have You Will Need to Buy
Laundry tub or
standpipe taller
than 96" (2.4 m)
Sump pump system (if not already
available)
Overhead sewer Standard 20 gal. (76 L), 30" (76.2 cm)
tall drain tub or utility sink and sump
pump (available from local plumbing
suppliers)
Floor drain Siphon break. Part Number 285834;
additional drain hose Part
Number 8318155; and connector kit,
Part Number 285835
Drain hose too
short 4 ft (1.2 m) drain hose extension kit, Part
Number 285863
Water faucets
beyond reach of
fill hoses 2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314,
10 ft (3.0 m) Part Number 350008
Pedestal
Height
Approximate
height with
washer Color Part
Number
13" (33 cm) 51" (130 cm) White 42842
13" (33 cm) 51" (130 cm) Bisque 42844
13" (33 cm) 51" (130 cm) Graphite 42846
Stack Kit
Are you planning to stack your Kenmore washer and dryer? To do
so, find the stack kit (8541503) in the drum of the matching
Kenmore dryer. Follow instructions included with the kit.