Kenmore PLASMAWAVE 85450 - Manual (Page 7)

CONTROL PANEL
© ©: I
G>
B5150
85300/85450
A. A1IR QUALITY SENSOR: Automalicany
monitors tfi© air quality level and adjusts
fan speed accordingly.
B. CHECK FILTER INDICATOR: The indi­
cator will signal when to replace the
True HEPA Filter.
C. RESET FILTER: Resets the CHECK
FILTER indicator light.
D. AUTO: Changes the fan speed to AUTO.
E. PLASMA INDICATOR: Displays the
PLASMA activity. (See page 2 for
PlasmaWave™^ Techno(ogy)
F. AIR QUALITY LEVEL INDICATOR:
Displays the current quality of the air.
G. FAN SPEED INDICATOR:
Displays current fan speed setting.
H. FAN SPEED: Once the machine is on
and in AUTO mode, switch to manual
operation by pressing FAN SPEED
button on the unit.
J. POWER BUTTON: Turns the unit on
and off.
K. LIGHT SENSOR: When in AUTO mode,
this keeps the control panel tights dim
and will not allow the fan to increase
above QUIET speed when the room
is dark.
OPERATION
AUTOMATIC OPERATION: When in
AUTO mode, the air cleaner will automati­
cally sense the amount of impurities in the
air and adjust the fan speed accordingly.
When the unit is first turned on it will default
to AUTO mode.
MANUAL OPERATION (Adjusting the
fan speed): Once the unit is on, switch to
manual operation by pressing the UP &
DOWN arrow buttons on the remote control
or the FAN SPEED button. Once in manual
operation, the fan speed wili not automati­
cally adjust to the air quality or light level.
■ QUIET, MEDIUM, HIGH: These levels are
recommended for standard, daytime use,
HIGH win activate automatically when
sensors delect high levels of impurities
in the air. QUIET, the lowest setting, is the
energy saving mode.
' TURBO: The TURBO level, the highest
fan speed, can be activated manually for
maximum air circutation. The TURBO
level will not automatically activate
8