Warning, Handle assembly, Caution – Kenmore 216.3701 User Manual
Page 7: Extension wand/ crevice tool placement
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
Please pay special attention to these hazard alert boxes, and follow any
instructions given. WARNING statements alert you to such dangers as
fire, electric shock, burns and personal injury. CAUTION statements alert
you to such dangerous personal injury and/or property damage.
ACISCIIIIiSl V iMdTDl
AddClWtSlwi'Y ' liMd I
I lUIMw
A
WARNING
Electrical Shock Hazard
Do not plug into the electrical
supply until the assembly is
complete. Failure to do so could
result in electrical shock or
injury.
2. Push handle
plug onto the
front of cleaner.
Insert the one
(1) screw into
the back of the
handle and
tighten, making
sure the handle
plug is secure.
Before assembling the vacuum cleaner,
check the PACKING LIST on the cover
of the separate REPAIR PARTS LIST or
on the carton., Use this list to verity that
you have received all the components of
your new Kenmore vacuum cleaner.
HANDLE ASSEMBLY
1. Attach upper
handle to main
body of cleaner.
A
CAUTION
Do not overtighten.
Overtightening could strip the
screvsr holes.
Do not operate the vacuum
cleaner without the screws in
place.
EXTENSION WAND/
CREVICE TOOL
PLACEMENT
Place the crevice tool (A) in the top of the
extension wand. Place in wand holder on
left side of vacuum cleaner. Place the extra
extension wand (B) in the wand holder on
olHlisi
If lint i^ioiai^i^ati“
lllc;
\
j
I
Llicir VciUUUIIi L«fCrCtifk;l.s