Plan your installation, Tools needed – Kenmore 625.38356 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Plan Your Installation
PLAN YOUR INSTALLATION
It is recommended to read through the entire manual before
beginning your installation. Follow all steps exactly. Reading this
manual will also help you get all the benefits from your system.
TOOLS NEEDED:
• Safety glasses
• Flathead screw driver
• Phillips screw driver
• Adjustable slip joint pliers
• Tape measure or ruler
Safety Glasses
Flathead Screwdriver
Phillips Screwdriver
Adjustable Slip Joint Pliers
Tape Measure or Ruler
ADDITIONAL TOOLS NEEDED FOR THE FOLLOWING INSTALLATIONS:
SOLDERED COPPER
THREADED PIPE
CPVC OR PVC PLASTIC
• Tubing Cutter
• Flacksaw or Pipe Cutter
• Flacksaw
• Propane Torch
• Pipe Wrenches
• Adjustable Wrench
• Solid Core LEADFREE Solder
• Pipe Threading Tool
• Primer and Solvent Cement
• Paste Flux
• Pipe Joint Compound approved
approved for use on potable water-
• Emery Cloth
• or Sandpaper
for use on potable water
THE PROPER ORDER TO INSTALL WATER TREATING EQUIPMENT
(Shows sequence of equipment only. Seldom, if ever, would all items be needed.)
Sediment or Taste &
Odor Cartridge Filter
Cold, soft water
Hot, soft water
Kitchen or Bathroom
V Cold Faucet
Hard Water to
Outside Faucets
a
l I
I I I I 1 r
Q Q Q Q
Well Water Supply
Solution
Pressure or
Dispensing
Captive Air System
Sediment
Cartridge Filter
(Optional
Location)
Water
Softener
*Taste &
Odor Filter
Iron
Filter
Neutralizer Clarifying
Filter
•
Always place an Iron Filter UPSTREAM of the water softener.
•
Always place a Neutralizer UPSTREAM of an Iron Filter, etc., as shown.
• Place a Taste & Odor Filter UPSTREAM of a water softener on a chlorinated water supply
and DOWNSTREAM of a water softener on a non-chlorinated water supply.
FIG. 2
Questions? Call The Kenmore Water Line 1-800-426-9345