Canon XH A1 User Manual
Page 105
105
Editing
E
Converting Analog Signals into Digital
Signals (Analog-Digital Converter)
Using the camcorder you can convert analog video input signals to a digital video signal (SD standard)
and output it through the HDV/DV terminal.
Open the menu and select [SIGNAL SETUP]. Select [AV DV], set it to [ON] and close the
menu.
Depending on the signal sent from the connected device, the conversion from analog to digital
signals might not work properly (e.g., signals that include copyright protection signals or anomalous
signals such as ghost signals).
For normal use, set [AV DV] to [OFF]. If it is set to [ON], digital signals cannot be input via the
camcorder’s HDV/DV terminal.
Depending on the software and the specifications of your computer, you may not be able to transfer
converted signals via the HDV/DV terminal.
We recommend powering the camcorder from a household power outlet.
You can also press the AV DV button on the wireless controller. Repeatedly pressing the
controller’s button will toggle the AV DV conversion on and off.
When connecting to a TV/video with SCART terminal, use a SCART adapter with input capability
(commercially available). The supplied SCART Adapter PC-A10 is for output only.
MENU
SIGNAL SETUP
AV
DV••••••••OFF